«Model: SF-1670M READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE USE IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, basic precautions ...»
After soaking, shake the nozzles – you should hear a rattling sound. If none is heard, gently tap the nozzle against a solid surface to loosen any obstruction. If still no sound is heard, the nozzle should be replaced.
IMPORTANT: Never attempt to clear nozzles with pins, nails or other metal objects as this can damage the misting orifice.
CAUTION: There are no consumer serviceable parts inside this fan. If you experience a problem, please see warranty for information. Please do not attempt to open the motor housing of the fan; doing so may cause damage to the fan or personal injury as well as voiding your warranty.
To purchase replacement nozzles, contact Sunpentown Customer Service at 800-330-0388.
8 CARE & STORAGE Turn off power and unplug unit before cleaning.
Use only a soft moistened cloth with a mild soap solution to clean the fan.
Do not immerse fan in water.
Do not use gasoline thinners or other chemicals to clean fan.
To dismantle for cleaning or long term storage, follow the assembly instructions in reverse order. The fan blade may be washed in warm water with a mild detergent. Alternatively, it may be wiped clean with a soft damp cloth. Be sure it is completely dry before re-fitting.
The front and rear grills, stand and base can be cleaned with a soft brush or soft damp cloth.
For storage, clean fan carefully as instructed and store in its original box or cover with plastic/cloth. Store in a clean, dry place.
REPLACING THE FUSEWARNING: Handle with care when replacing the fuse. Be cautious of broken glass or metal.
1. The fuse is located on the side of the plug.
2. Use a tapered, flat-tipped tool (such as a small screw driver) to slide open the fuse cover.
3. Remove fuse carefully. Insert the tip of your tool into fuse slot and pry on the fuse slowly and gradually, do not over-exert.
4. Replace only with fuse type 5A 125V. Insert fuse into slot and use tool to gently press on each end. Do not press on the glass tube but the copper cap at each end.
5. Push cover back in place.
DO NOT OPERATE APPLIANCE IF THE POWER CORD SHOWS ANY DAMAGE, OR IF
APPLIANCE WORKS INTERMITTENTLY OR STOPS WORKING ENTIRELY.
Important: During the first few minutes of initial use, you may notice a slight odor, this is normal and will quickly disappear.
This guarantee is subject to the following terms:
Sunpentown must be notified of the fault.
Proof of purchase must be presented to Sunpentown’s nominated representative.
The warranty will be void if the product if modified, misused or repaired by an unauthorized person.
The warranty after repair will not be extended beyond the original one-year period.
All replacement parts will be new or reconditioned.
Parts, which are replaced, become the property of Sunpentown.
The warranty applies for the use of the product in the USA only.
What is NOT COVERED:
Warranty does not include freight charges.
Incidental or consequential damage caused by possible defects with this product.
Damage to product caused by improper power supply voltage, accident, fire, floods or acts of nature.
Failure of product resulting from unauthorized modifications to the product.
Improper installation or failure to perform the necessary maintenance.