FREE ELECTRONIC LIBRARY - Dissertations, online materials

Pages:     | 1 |   ...   | 15 | 16 ||

«UNIVERSITY OF CALIFORNIA Santa Barbara Design and Characterization of Fibrillar Adhesives A Dissertation submitted in partial satisfaction of the ...»

-- [ Page 17 ] --

[35] N. Gravish, M. Wilkinson, S. Sponberg, A. Parness, N. Esparza, D. Soto, T. Yamaguchi, M. Broide, M. Cutkosky, C. Creton, and K. Autumn, Rate-dependent frictional adhesion in natural and synthetic gecko setae, Journal of The Royal Society Interface, 7 (2010), pp. 259– 269.

[36] C. Greiner, E. Arzt, and A. del Campo, Hierarchical gecko-like adhesives, Advanced Materials, 21 (2009), pp. 479–482.

[37] C. Greiner, A. del Campo, and E. Arzt, Adhesion of bioinspired micropatterned surfaces: Effects of pillar radius, aspect ratio, and preload, Langmuir, 23 (2007), pp. 3495–3502.

[38] W. R. Hansen and K. Autumn, Evidence for self-cleaning in gecko setae, Proceedings of the National Academy of Sciences of the United States of America, 102 (2005), pp. 385–389.

Bibliography [39] E. Hawkes, E. Eason, A. Asbeck, and M. Cutkosky, The gecko’s toe: Scaling directional adhesives for climbing applications, Mechatronics, IEEE/ASME Transactions on, 18 (2013), pp. 518–526.

[40] H. Hermann Schleich and W. Kastle, Ultrastrukturen an gecko-zehen (reptilia: Sauria: Gekkonidae), Amphibia-Reptilia, 7 (1986), pp. 141–166.

¨ [41] H. Hertz, Uber die ber¨hrung fester elastischer k¨rper, Journal f¨r die reine u o u und angewandte Mathematik (Crelles Journal), 1882 (1882), pp. 156–171.

[42], Miscellaneous papers, Macmillan, London, 1896.

[43] G. Huber, H. Mantz, R. Spolenak, K. Mecke, K. Jacobs, S. N.

Gorb, and E. Arzt, Evidence for capillarity contributions to gecko adhesion from single spatula nanomechanical measurements, Proceedings of the National Academy of Sciences of the United States of America, 102 (2005), pp. 16293–16296.

[44] S. Inaba, S. Fujino, and K. Morinaga, Young’s modulus and compositional parameters of oxide glasses, Journal of the American Ceramic Society, 82 (1999), pp. 3501–3507.

[45] D. J. Irschick, C. C. Austin, K. Petren, R. N. Fisher, J. B.

Losos, and O. Ellers, A comparative analysis of clinging ability among pad-bearing lizards, Biological Journal of the Linnean Society, 59 (1996), pp. 21–35.

[46] J. Israelachvili, Intermolecular and Surface Forces, Intermolecular and Surface Forces, Elsevier Science, Burlington, MA, 2011.

[47] H. E. Jeong, J.-K. Lee, H. N. Kim, S. H. Moon, and K. Y. Suh, A nontransferring dry adhesive with hierarchical polymer nanohairs, Proceedings of the National Academy of Sciences, 106 (2009), pp. 5639–5644.

[48] H. E. Jeong, J.-K. Lee, M. K. Kwak, S. H. Moon, and K. Y. Suh, Effect of leaning angle of gecko-inspired slanted polymer nanohairs on dry adhesion, vol. 96, AIP, 2010. 4 Applied Physics Letters.

[49] H. E. Jeong, S. H. Lee, P. Kim, and K. Y. Suh, Stretched polymer nanohairs by nanodrawing, Nano Letters, 6 (2006), pp. 1508–1513.

[50] K. Jin, Y. Tian, J. S. Erickson, J. Puthoff, K. Autumn, and N. S.

Pesika, Design and fabrication of gecko-inspired adhesives, Langmuir, 28 (2012), pp. 5737–5742.

Bibliography [51] K. L. Johnson, K. Kendall, and A. D. Roberts, Surface energy and the contact of elastic solids, Proceedings of the Royal Society of London. A.

Mathematical and Physical Sciences, 324 (1971), pp. 301–313.

[52] K. Kendall, Thin-film peeling-the elastic term, Journal of Physics D: Applied Physics, 8 (1975), p. 1449.

[53] S. Kim, B. Aksak, and M. Sitti, Enhanced friction of elastomer microfiber adhesives with spatulate tips, Applied Physics Letters, 91 (2007), pp. 221913–3.

[54] S. Kim and M. Sitti, Biologically inspired polymer microfibers with spatulate tips as repeatable fibrillar adhesives, Applied Physics Letters, 89 (2006), p. 261911.

[55] S. Kim, M. Spenko, S. Trujillo, B. Heyneman, D. Santos, and M. Cutkosky, Smooth vertical surface climbing with directional adhesion, Robotics, IEEE Transactions on, 24 (2008), pp. 65 –74.

[56] T.-i. Kim, H. E. Jeong, K. Y. Suh, and H. H. Lee, Stooped nanohairs:

Geometry-controllable, unidirectional, reversible, and robust gecko-like dry adhesive, Advanced Materials, 21 (2009), pp. 2276–2281.

[57] K. Kristiansen, P. McGuiggan, G. Carver, C. Meinhart, and J. Israelachvili, 3D force and displacement sensor for SFA and AFM measurements, Langmuir, 24 (2007), pp. 1541–1549.

[58] E. Kroner, R. Maboudian, and E. Arzt, Adhesion characteristics of PDMS surfaces during repeated pull-off force measurements, Advanced Engineering Materials, 12 (2010), pp. 398–404.

[59] M. K. Kwak, H. E. Jeong, W. G. Bae, H.-S. Jung, and K. Y. Suh, Adhesive microstructures: Anisotropic adhesion properties of triangular-tipshaped micropillars, Small, 7 (2011), pp. 2266–2266.

[60] M. K. Kwak, H.-E. Jeong, and K. Y. Suh, Rational design and enhanced biocompatibility of a dry adhesive medical skin patch, Advanced Materials, 23 (2011), pp. 3949–3953.

[61] D. H. Lee, Y. Kim, R. S. Fearing, and R. Maboudian, Effect of fiber geometry on macroscale friction of ordered low-density polyethylene nanofiber arrays, Langmuir, 27 (2011), pp. 11008–11016.

Bibliography [62] H. Lee, B. P. Lee, and P. B. Messersmith, A reversible wet/dry adhesive inspired by mussels and geckos, Nature, 448 (2007), pp. 338–341.

[63] J. Lee, B. Bush, R. Maboudian, and R. S. Fearing, Gecko-inspired combined lamellar and nanofibrillar array for adhesion on nonplanar surface, Langmuir, 25 (2009), pp. 12449–12453.

[64] J. Lee and R. S. Fearing, Contact self-cleaning of synthetic gecko adhesive from polymer microfibers, Langmuir, 24 (2008), pp. 10587–10591.

[65] J. Lee, R. S. Fearing, and K. Komvopoulos, Directional adhesion of gecko-inspired angled microfiber arrays, Applied Physics Letters, 93 (2008), p. 191910.

[66] J. Lee, C. Majidi, B. Schubert, and R. S. Fearing, Sliding-induced adhesion of stiff polymer microfibre arrays. I. macroscale behaviour, Journal of The Royal Society Interface, 5 (2008), pp. 835–844.

[67] R. Long, C.-Y. Hui, S. Kim, and M. Sitti, Modeling the soft backing layer thickness effect on adhesion of elastic microfiber arrays, Journal of Applied Physics, 104 (2008), p. 044301.

[68] P. F. A. Maderson, Keratinized epidermal derivatives as an aid to climbing in gekkonid lizards, Nature, 203 (1964), pp. 780–781.

[69] A. Mahdavi, L. Ferreira, C. Sundback, J. W. Nichol, E. P. Chan, D. J. D. Carter, C. J. Bettinger, S. Patanavanich, L. Chignozha, E. Ben-Joseph, A. Galakatos, H. Pryor, I. Pomerantseva, P. T.

Masiakos, W. Faquin, A. Zumbuehl, S. Hong, J. Borenstein, J. Vacanti, R. Langer, and J. M. Karp, A biodegradable and biocompatible gecko-inspired tissue adhesive, Proceedings of the National Academy of Sciences, 105 (2008), pp. 2307–2312.

[70] C. Majidi, R. E. Groff, Y. Maeno, B. Schubert, S. Baek, B. Bush, R. Maboudian, N. Gravish, M. Wilkinson, K. Autumn, and R. S. Fearing, High friction from a stiff polymer using microfiber arrays, Phys. Rev. Lett., 97 (2006), p. 076103.

[71] C. S. Majidi, R. E. Groff, and R. S. Fearing, Attachment of fiber array adhesive through side contact, Journal of Applied Physics, 98 (2005), p. 103521.

Bibliography [72] D. Maugis, Adhesion of spheres: The JKR-DMT transition using a dugdale model, Journal of Colloid and Interface Science, 150 (1992), pp. 243–269.

¨¸ [73] Y. Menguc, S. Y. Yang, S. Kim, J. A. Rogers, and M. Sitti, Gecko-inspired controllable adhesive structures applied to micromanipulation, Advanced Functional Materials, 22 (2012), pp. 1246–1254.

[74] C. Menon and M. Sitti, Biologically inspired adhesion based surface climbing robots, in Robotics and Automation, 2005. ICRA 2005. Proceedings of the 2005 IEEE International Conference on, 2005, pp. 2715–2720.

[75] Y. Mo, K. T. Turner, and I. Szlufarska, Friction laws at the nanoscale, Nature, 457 (2009), pp. 1116–1119.

[76] B. Murarash, Y. Itovich, and M. Varenberg, Tuning elastomer friction by hexagonal surface patterning, Soft Matter, 7 (2011), pp. 5553–5557.

[77] M. P. Murphy, B. Aksak, and M. Sitti, Adhesion and anisotropic friction enhancements of angled heterogeneous micro-fiber arrays with spherical and spatula tips, Journal of Adhesion Science & Technology, 21 (2007), pp. 1281–1296.

–  –  –

[80] M. T. Northen, C. Greiner, E. Arzt, and K. L. Turner, A geckoinspired reversible adhesive, Advanced Materials, 20 (2008), pp. 3905–3909.

[81] M. T. Northen and K. L. Turner, A batch fabricated biomimetic dry adhesive, Nanotechnology, 16 (2005), p. 1159.

[82] Y. Okamoto, K. Nishio, J. ichi Sugiura, M. Hirano, and T. Nitta, Friction of elastomer-on-glass system and direct observation of its frictional interface, Journal of Physics: Conference Series, 89 (2007), p. 012011.

[83] A. Parness, D. Soto, N. Esparza, N. Gravish, M. Wilkinson, K. Autumn, and M. Cutkosky, A microfabricated wedge-shaped adhesive array displaying gecko-like dynamic adhesion, directionality and long lifetime, Journal of The Royal Society Interface, 6 (2009), pp. 1223–1232.

Bibliography [84] A. M. Peattie, C. Majidi, A. Corder, and R. J. Full, Ancestrally high elastic modulus of gecko setal beta-keratin, Journal of The Royal Society Interface, 4 (2007), pp. 1071–1076.

[85] A. Peressadko and S. N. Gorb, When less is more: Experimental evidence for tenacity enhancement by division of contact area, The Journal of Adhesion, 80 (2004), pp. 247–261.

[86] S. Pertuz, D. Puig, and M. A. Garcia, Analysis of focus measure operators for shape-from-focus, Pattern Recognition, 46 (2013), pp. 1415 – 1432.

[87] N. S. Pesika, Y. Tian, B. Zhao, K. Rosenberg, H. Zeng, P. McGuiggan, K. Autumn, and J. N. Israelachvili, Peel-zone model of tape peeling based on the gecko adhesive system, The Journal of Adhesion, 83 (2007), pp. 383–401.

[88] L. Qu, L. Dai, M. Stone, Z. Xia, and Z. L. Wang, Carbon nanotube arrays with strong shear binding-on and easy normal lifting-off, Science, 322 (2008), pp. 238–242.

[89] Y. Rahmawan, T.-i. Kim, S. J. Kim, K.-R. Lee, M.-W. Moon, and K.-Y. Suh, Surface energy tunable nanohairy dry adhesive by broad ion beam irradiation, Soft Matter, 8 (2012), pp. 1673–1680.

[90] S. M. Rubinstein, G. Cohen, and J. Fineberg, Detachment fronts and the onset of dynamic friction, Nature, 430 (2004), pp. 1005 –1009.

[91] S. M. Rubinstein, G. Cohen, and J. Fineberg, Visualizing stickslip:

experimental observations of processes governing the nucleation of frictional sliding, Journal of Physics D: Applied Physics, 42 (2009), p. 214016.

[92] R. Ruibal and V. Ernst, The structure of the digital setae of lizards, Journal of Morphology, 117 (1965), pp. 271–293.

[93] A. P. Russell, A contribution to the functional analysis of the foot of the tokay, gekko gecko (reptilia: Gekkonidae), Journal of Zoology, 176 (1975), pp. 437–476.

[94] M. Ruths, A. D. Berman, and J. N. Israelachvili, Surface forces and nanorheology of molecularly thin films, in Nanotribology and Nanomechanics: An Introduction, B. Bhushan, ed., Springer-Verlag, Berlin, Germany, 1st ed., 2005, pp. 401,430.

Bibliography [95] D. Sameoto and C. Menon, Direct molding of dry adhesives with anisotropic peel strength using an offset lift-off photoresist mold, Journal of Micromechanics and Microengineering, 19 (2009), p. 115026.

[96], A low-cost, high-yield fabrication method for producing optimized biomimetic dry adhesives, Journal of Micromechanics and Microengineering, 19 (2009), p. 115002.

[97], Deep UV patterning of acrylic masters for molding biomimetic dry adhesives, Journal of Micromechanics and Microengineering, 20 (2010), p. 115037.

[98] D. Santos, M. Spenko, A. Parness, S. Kim, and M. Cutkosky, Directional adhesion for climbing: theoretical and practical considerations, Journal of Adhesion Science and Technology, 21 (2007), pp. 1317–1341.

[99] R. A. Sauer, The peeling behavior of thin films with finite bending stiffness and the implications on gecko adhesion, The Journal of Adhesion, 87 (2011), pp. 624–643.

[100] F. Schneider, T. Fellner, J. Wilde, and U. Wallrabe, Mechanical properties of silicones for MEMS, Journal of Micromechanics and Microengineering, 18 (2008), p. 065008.

[101] B. Schubert, J. Lee, C. Majidi, and R. S. Fearing, Sliding-induced adhesion of stiff polymer microfibre arrays. II. microscale behaviour, Journal of The Royal Society Interface, 5 (2008), pp. 845–853.

[102] H. Shahsavan and B. Zhao, Biologically inspired enhancement of pressure-sensitive adhesives using a thin film-terminated fibrillar interface, Soft Matter, 8 (2012), pp. 8281–8284.

[103] K. G. Sharp, G. S. Blackman, N. J. Glassmaker, A. Jagota, and C.-Y. Hui, Effect of stamp deformation on the quality of microcontact printing: theory and experiment, Langmuir, 20 (2004), pp. 6430–6438.

PMID: 15248733.

[104] M. Sitti and R. S. Fearing, Synthetic gecko foot-hair micro/nanostructures as dry adhesives, Journal of Adhesion Science and Technology, 17 (2003), pp. 1055–1073.

[105] I. N. Sneddon, The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile, International Journal of Engineering Science, 3 (1965), pp. 47–57.

Bibliography [106] A. Sofla, E. Seker, J. P. Landers, and M. R. Begley, PDMS-glass interface adhesion energy determined via comprehensive solutions for thin film bulge/blister tests, Journal of Applied Mechanics, 77 (2010), p. 031007.

[107] D. Soto, G. Hill, A. Parness, N. Esparza, M. Cutkosky, and T. Kenny, Effect of fibril shape on adhesive properties, Applied Physics Letters, 97 (2010), p. 053701.

[108] D. Tabor, Surface forces and surface interactions, Journal of Colloid and Interface Science, 58 (1977), pp. 2–13.

[109] J. Tamelier, S. Chary, and K. L. Turner, Vertical anisotropic microfibers for a gecko-inspired adhesive, Langmuir, 28 (2012), pp. 8746–8752.

[110] J. Tamelier, S. Chary, K. L. Turner, J. Yu, S. Das, and J. N.

Israelachvili, Millimeter size patch behavior of gecko-inspired reversible adhesive, in IEEE Sensors 2011, Limerick, Ireland, 2011, pp. 1819–1822.

[111] Y. Tian, N. Pesika, H. Zeng, K. Rosenberg, B. Zhao, P. McGuiggan, K. Autumn, and J. Israelachvili, Adhesion and friction in gecko toe attachment and detachment, Proceedings of the National Academy of Sciences, 103 (2006), pp. 19320–19325.

[112] O. Unver and M. Sitti, Flat dry elastomer adhesives as attachment materials for climbing robots, Robotics, IEEE Transactions on, 26 (2010), pp. 131 –141.

[113] O. Unver, A. Uneri, A. Aydemir, and M. Sitti, Geckobot: a gecko inspired climbing robot using elastomer adhesives, in Robotics and Automation, 2006. ICRA 2006. Proceedings 2006 IEEE International Conference on, 2006, pp. 2329–2335.

[114] M. Varenberg and S. Gorb, Shearing of fibrillar adhesive microstructure: friction and shear-related changes in pull-off force, Journal of The Royal Society Interface, 4 (2007), pp. 721–725.

[115] M. Varenberg and S. N. Gorb, Hexagonal surface micropattern for dry and wet friction, Advanced Materials, 21 (2009), pp. 483–486.

[116] H. Yoon, H. E. Jeong, T.-i. Kim, T. J. Kang, D. Tahk, K. Char, and K. Y. Suh, Adhesion hysteresis of janus nanopillars fabricated by nanomolding and oblique metal deposition, Nano Today, 4 (2009), pp. 385– 392.

Bibliography [117] J. Yu, S. Chary, S. Das, J. Tamelier, N. S. Pesika, K. L. Turner, and J. N. Israelachvili, Gecko-inspired dry adhesive for robotic applications, Advanced Functional Materials, 21 (2011), pp. 3010–3018.

[118] J. Yu, S. Chary, S. Das, J. Tamelier, K. L. Turner, and J. N.

Israelachvili, Friction and adhesion of gecko-inspired PDMS flaps on rough surfaces, Langmuir, 28 (2012), pp. 11527–11534.

[119] B. Yurdumakan, N. R. Raravikar, P. M. Ajayan, and A. Dhinojwala, Synthetic gecko foot-hairs from multiwalled carbon nanotubes, Chem. Commun., (2005), pp. 3799–3801.

[120] B. Zhao, N. Pesika, K. Rosenberg, Y. Tian, H. Zeng, P. McGuiggan, K. Autumn, and J. Israelachvili, Adhesion and friction force coupling of gecko setal arrays: Implications for structured adhesive surfaces, Langmuir, 24 (2008), pp. 1517–1524.

[121] B. Zhao, N. Pesika, H. Zeng, Z. Wei, Y. Chen, K. Autumn, K. Turner, and J. Israelachvili, Role of tilted adhesion fibrils (setae) in the adhesion and locomotion of gecko-like systems, The Journal of Physical Chemistry B, 113 (2009), pp. 3615–3621.

[122] Y. Zhao, T. Tong, L. Delzeit, A. Kashani, M. Meyyappan,

and A. Majumdar, Interfacial energy and strength of multiwalled-carbonnanotube-based dry adhesive, Journal of Vacuum Science and Technology B:

Pages:     | 1 |   ...   | 15 | 16 ||

Similar works:

«Spatial Cadastral Information Systems The maintenance of digital cadastral maps Wolfgang Effenberg Submitted in total fulfilment of the requirements for the degree Doctor of Philosophy May 2001 Department of Geomatics The University of Melbourne Declaration This is to certify that: (i) the thesis comprises only my original work; (ii) due acknowledgement has been made in the text to all materials used; (iii) the thesis is less than 100,000 words in length, exclusive of tables, maps,...»

«Animacy, Anthropomimesis, and Musical Line Dissertation Presented in Partial Fulfillment of the Requirements for the Degree Doctor of Philosophy in the Graduate School of an Ohio State University By George John (Yuri) Broze III Graduate Program in Music Theory The Ohio State University 2013 Dissertation Committee: David Huron, Advisor David Clampitt Gregory Proctor © Copyright by George John (Yuri) Broze III 2013 Abstract Music is argued to exhibit animacy cues—perceptual indicators that it...»

«OREGON STATE UN VERS TY LIBRARIES 1111 1111 11 11111 1111 12 0003896558 Tillamook Prehistory and Its Relation to the Northwest Coast Culture Area by Thomas M. Newman /-iPARTMENT OF ANTHROPfottLIBRARY, TILLAMOOK PREHISTORY AND ITS RELATION TO THE NORTHWEST COAST CULTURE AREA by THOMAS M. NEWMAN A THESIS Presented to the Department of Anthropology and the Graduate School of the University of Oregon in partial fulfillment of the requirements for the degree of Doctor of Philosophy June 1959...»


«A CONCEPTUAL FRAMEWORK AND APPROACH FOR ENHANCING TRANSPORTATION ASSET MANAGEMENT (TAM) IMPLEMENTATION FOR SUSTAINED TAM PROGRAMS A Dissertation Presented to The Academic Faculty By Margaret-Avis N. A. Akofio-Sowah In Partial Fulfillment of the Requirements for the Degree Doctor of Philosophy in Civil and Environmental Engineering Georgia Institute of Technology August 2015 Copyright © Margaret-Avis A. Akofio-Sowah 2015 A CONCEPTUAL FRAMEWORK AND APPROACH FOR ENHANCING TRANSPORTATION ASSET...»

«kwb.45-variantology_inhalt_neu:kwb.31-variantology_end_5.0 19.02.10 14:12 Seite 215 david link Scrambling T-R-U-T-H Rotating Letters as a Material Form of Thought “Know that the secrets of God and the objects of His science, the subtle realities and the dense realities, the things of above and the things from below, belong to two categories: there are numbers and there are letters. The secrets of the letters are in the numbers, and the epiphanies of the numbers are in the letters. The numbers...»

«Christy Keele Todd McCready Dec. 14, 2006 Automated Schenkerian Analysis Abstract SchenkeR is a project written in R that performs limited musical analysis using reductive techniques based on the theories of Heinrich Schenker. It attempts to identify notes belonging to the Urlinie by scoring the importance of each note across a number of different categories, as well as denoting other features that would be relevant to include in a Schenkerian graph, such as consonant skips. It has been tested...»

«DOCUMENT RESUME ED 290 010 CE 049 360 AUTHOR Holmberg, Borje TITLE On the Concept and Lcademic Discipline of Adult Education. ZIFF Papiere 52. INSTITUTION FernUniversitat, Hagen (West Germany). Zentrales Inst. fur Fernstudienforschung Arbeitsbereich. PUB DATE Sep 84 NOTE 27p. PUB TYPE Information Analyses (070) EDRS PRICE MF01/PCO2 Plus Postage. DESCRIPTORS Adult Basic Education; *Adult Education; Adult Students; *College Programs; Continuing Education; Distance Education; *Educational...»

«Pre-Course Handbook BA (Hons) Professional Cookery with foundation London Geller College of Hospitality & Tourism BA (Hons) Food and Professional Cookery with foundation Course Handbook 2016-2017 Section BA (Hons) Food and Professional Cookery with foundation Course Handbook Contents Page No. Section 1 Key Information 1.1 Welcome to the Course 4 1.2 Overview of the Course 5 1.3 Sources of Help and Support 6 1.4 Facts and Figures 8 1.5 Your Responsibilities 9 Section 2 Structure and Content 2.1...»

«Helsinki University of Technology Laboratory of Computational Engineering Teknillisen korkeakoulun Laskennallisen tekniikan laboratorion julkaisuja Espoo 2006 Report B59 HUMAN RECOGNITION OF BASIC EMOTIONS FROM POSED AND ANIMATED DYNAMIC FACIAL EXPRESSIONS Jari Kätsyri Dissertation for the degree of Doctor of Philosophy to be presented for public examination and debate in Auditorium K at Helsinki University of Technology on the 15th of December, 2006, at 12 o’clock noon. Helsinki University...»

«ABSTRACT Title of Dissertation: EFFECT OF DYNAMIC FLEXURAL LOADING ON THE DURABILITY AND FAILURE SITE OF SOLDER INTECONNECTS IN PRINTED WIRING ASSEMBLIES Joseph Varghese, Doctor of Philosophy, 2007 Dissertation directed by: Professor Abhijit Dasgupta Department of Mechanical Engineering This dissertation investigates the durability of solder interconnects of area array packages mounted on Printed Wiring Assemblies (PWAs) subjected to dynamic flexural loads, using a combination of testing,...»


<<  HOME   |    CONTACTS
2016 www.dissertation.xlibx.info - Dissertations, online materials

Materials of this site are available for review, all rights belong to their respective owners.
If you do not agree with the fact that your material is placed on this site, please, email us, we will within 1-2 business days delete him.